Electrolux ERN2201AOW Notice D'utilisation page 13

C
D
E
B
10. Install the vent grille (B).
11. Attach the hinge covers (E) to the
hinge.
12. Disconnect the parts (Ha), (Hb), (Hc)
and (Hd).
Hb
Hd
13. Install the part (Ha) on the inner side
of the kitchen furniture.
ca. 50 mm
ca. 50 mm
14. Push the part (Hc) on the part (Ha).
E
Ha
Hc
90°
21 mm
90°
21 mm
Ha
Hc
15. Open the appliance door and the
kitchen furniture door at an angle of
90°.
16. Insert the small square (Hb) into
guide (Ha).
17. Put together the appliance door and
the furniture door and mark the
holes.
8 mm
Hb
18. Remove the brackets and mark a
distance of 8 mm from the outer edge
of the door where the nail must be
fitted (K).
ENGLISH 13
Ha