Bosch GBL 650 Professional Notice Originale page 5

Keep cutting tools sharp and clean. Properly main-
u
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
u
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and
u
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Service
Have your power tool serviced by a qualified repair
u
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Safety instructions for blower
Do not blow any harmful substances, e.g. beech or oak
u
wood dust, rock dust or asbestos. These substances are
classified as carcinogenic.
Do not blow any liquids. The penetration of liquids in-
u
creases the risk of an electric shock.
Pay attention that bystanders are not injured by for-
u
eign objects that are blown off by the product.
Keep your fingers away from the openings of the
u
power tool during operation. Only operate the blower
with a nozzle attached. The rotating fan can injure you.
Ensure that the workplace is well ventilated.
u
Do not let children use the power tool unsupervised.
u
Children are at risk of injuring themselves this way.
Wear additional personal pro-
tective equipment such as pro-
tective glasses and a protective
mask. Wearing personal protec-
tion equipment appropriate to the
conditions reduces your exposure to hazardous substances.
Never use the power tool if the cable is damaged. Do
u
not touch the damaged cable and pull out the mains
plug if the cable is damaged while working. Damaged
cables increase the risk of an electric shock.
Do not crush the cable or run the device over it. Do not
u
pull on the power cable to pull the plug out of the
socket or to move the power tool. Damaged cables in-
crease the risk of an electric shock.
Pull the plug out of the socket before adjusting the
u
tool settings, changing accessories, or storing the
power tool. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
Bosch Power Tools
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is suitable for blowing unharmful substances.
The power tool is not suitable for blowing flammable materi-
als, metal chips and sharp objects such as screws or nails.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Handle
(2) Lock-on button for on/off switch
(3) On/off switch
(4) Caps for carbon brushes
(5) Air outlet
(6) Nozzle
(7) Air inlet
(8) Carbon brushes
Technical Data
Blower
Article number
Rated power input
Air volume
Air pressure
Weight according to
EPTA‑Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Values can vary depending upon the product and are subject to ap-
plication and environmental conditions. For further information
www.bosch-professional.com/wac.
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Fitting the nozzle (see figure A)
Attach the nozzle (6) tightly onto the air outlet (5) as indic-
ated by the arrow markings.
English | 5
GBL 650
3 601 JM4 0..
W 650
m³/min 3.7
mbar 60
kg 1.4
/II
1 609 92A 8WE | (20.10.2023)