EN
Lubricants
The standard lubricant range suitable for simalube includes modern high quality lubricants
tested and modified for the special requirements of grease and oil dispensers. Datasheets
are available online for all lubricants (www.simatec.com). Please refer to these datasheets
for the instructions/safety regulations of the grease/oil manufacturers.
No.
Application
SL01
Multipurpose grease
SL02
Multipurpose grease with MoS
SL04
High temperature grease
SL06
Fluid grease (EP)
SL09
Biodegradable grease
SL10
Food industry grease (NSF H1)
SL12
Very soft food industry grease (NSF H1)
SL14
Chain oil (EP)
SL15
High temperature chain oil (EP)
SL16
Machine oil
SL18
Food industry oil (NSF H1)
SL19
Biodegradable chain oil
SL24
Grease for a wide temperature range (EP)
SL25
High temperature grease
SL26
High performance grease (EP)
simalube can also be delivered filled with other lubricants or as an empty unit. Ask for
advice. The operation of simalube with oils of different viscosities is also possible.
EU Declaration of Conformity
simatec ag
Stadthof 2 in CH-3380 Wangen a. Aare
declares that the
single point lubricators
simalube & simalube multipoint
are designed and manufactured in
accordance with
Directive 2014/34/EU of the Europe-
an Parliament and the Council on the
harmonisation of the laws of the Mem-
ber States relating to equipment and
protective systems intended for use in
potentially explosive atmospheres.
Manufactured by:
simatec ag
Stadthof 2, CH-3380 Wangen a. Aare
www.simalube.com
2
The following standards have been applied:
EN 60079-0:2018
EN 60079-11:2012
EN 50303:2000
DEKRA Certification B.V.
NL-6825 MJ Arnhem
Identification number: 0344
KEMA 09ATEX0098X
Wangen a. Aare, 01.02.2021
Mischa Wyssmann, Managing Director / CEO
14
Temperature range
(in the area of lubrication)
–30/+120 °C
–25/+130 °C
–20/+160 °C
–30/+120 °C
–20/+80/100 °C
–40/+130 °C
–40/+130 °C
–10/+90 °C
–30/+250 °C
–20/+100 °C
–15/+150 °C
–15/+100 °C
–30/+140 °C
–20/+160 °C
–20/+150 °C
Notified Body:
Certificate No.