Kichler Lucian II Manuel D'instructions page 13

INSTALLING THE SWITCH HOUSING
CAUTION: To Reduce The Risk Of Electric Shock, Disconnect The
Electrical Supply Circuit To The Fan Before Installing Switch Housing.
Step 1. While holding the switch housing under your ceiling fan, push the
square wire connectors together. One from the fan and one from the
switch housing. (Fig.16)
NOTE: These connectors are color coded and will ONLY engage when
the colored strips are matched (aligned).
Step 2. Carefully push all the wires into the switch housing.
Attach the switch housing to the mounting plate with the screws
provided. Make sure each screw is tight. (Fig. 16)
Square Wire Connectors
Switch Housing
Fig. 16
42" , 52" and 60" Lucian II | 13
Mounting Plate
Screws