Kichler Lucian II Manuel D'instructions page 10

ELECTRICAL CONNECTIONS
WARNING: To avoid possible electrical shock, be sure you have turned
off the power at the main circuit panel.
Follow the steps below to connect the fan to your household wiring. Use
the wire connecting nuts suppled with your fan. Secure the connectors
with electrical tape. Make sure there are no loose wire strands or
connections.
Step 1. Connect the fan supply (black) wire and light supply (blue) wire to
the black household supply wire as shown in Figure 12.
Step 2. Connect the neutral fan (white) wire to the neutral household
(white) wire.
Step 3. Connect the fan ground wire (green) to the household ground wire.
Step 4. After connecting the wires, spread them apart so that the green
and white wires are on one side of the outlet box and the black wires are
on the other side.
Step 5. Turn the connecting nuts upward and push the wiring into the
outlet box.
10 | KICHLER.COM
Power Lines
120V
Green
Ground
Wiring
Box
Ground to Mounting
Bracket or Downrod
Fig. 12