Publicité
Les langues disponibles
Les langues disponibles
Functions of the display:
Green Light
Brush Lowers
(A)
Green Light
Brush Raises
(B)
Flashing and Motor Off Brush Jam-
Red Light (C)
med -Clear
Flashing and Motor On (when
Red Light (C)
machine is upright position) - Take
Care: Brush in contact with carpet
Continuous - Change paper bag or
Red Light (D)
clear blockage
Flashing - Motor switched off due to
Red Light (D)
full paper bag or blockage
On hard floors the adjustment wheel (143), moves
upwards into the machine so that the brush becomes
flush with the floor. Therefore, the Hillyard XP12
Series can also be used to vacuum hard floors.
On carpeted floors the adjustment wheel (143) moves
downwards out of the machine so that the brush rises.
The adjustment wheel (143) rises and lowers to
adjust the brush to the optimal setting. This combines
effective, gentle brushing with a smooth easy action.
When the machine is switched on in the upright
position the brush automatically rises from the carpet.
To release the machine from the upright position,
press down the foot pedal (18). The brush will auto-
matically lower.
To vacuum in corners etc.,take hold of the telescopic
handle grip, lift it away from the machine and stretch
out the hose. After use insert the telescopic attach-
ment tube into the back of the machine. Raise the
handle of the machine and the hose will automatically
retract. To use the. hose without the tube as shown in
the right hand picture, the hose will pull out of the tube
while the tube is fitted to the machine. Alternatively,
press the release catch (27) on picture 2.
Never run over the cable with the brush/ suction
head.
Always carry the machine over steps and sills.
8.643-389.0 Manual - Trident Hillyard V12XP
143
143
18
24
12
20
Operation
a b c d
a
b
12
16 17
9
Publicité
