Publicité
Les langues disponibles
Les langues disponibles
2
appliance description
1.
Inner chimney
2.
Outer chimney
3.
Cooker hood
4.
Controls
5.
Metal grease filters - 2
6.
Lighting (LED spots 2 x 3.0W)
3
before the first use
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the
packaging material. Keep the material (plastic, polystyrene and cardboard) out of reach of children. Check the appliance
after unpacking for any damage, possible from transportation. Place the appliance on a flat and stable surface.
This appliance should be installed and connected to the power supply by a recognized fitter who is familiar with, and works
according to the correct safety regulations.
How to install the appliance, is instructed in the installation instructions (chapter 7).
The appliance must be connected with a properly installed fused socket. The power supply (AC) and voltage at the
operating point must correspond with the details on the rating label of the appliance.
DISCHARGE SYSTEM
This cooker hood is able to discharge cooking vapours in two ways: via a direct air discharge to the outside or with
recirculation.
Select how you want to use the cooker hood and install it according to the
instructions.
DISCHARGE TO THE OUTSIDE - connect to a discharge channel.
The sucked in and filtered cooking vapours are discharged to the outside.
This is the recommended option.
RECIRCULATION - the fat particles and sucked in cooking vapours are
filtered.
The sucked in air is not discharged, but blown back into the kitchen. You
must install carbon filters on the motor. A free outflow of the sucked in air
is necessary.
Caution! The carbon filters are not a standard part of the delivery. You must order
these accessories separately. Order the accessories at your dealer or via the Inventum parts webshop.
20
•
English
6
1
2
3
4
5
Publicité
