Publicité
Les langues disponibles
Les langues disponibles
Electronic Programme Guide (EPG)
Some, but not all channels send information about the
current and next programmes. Press the EPG button
to view the EPG menu.
Info bar commands:
RED button: Previous day.
GREEN button: Next day.
Y E L L O W b u t t o n : Z o o m s t o t h e s e l e c t e d
programme.
BLUE button - Next day: displays filtering options.
BLUE: displays filtering options.
Teletext
"
" Teletext / Mix: Activates teletext mode when
pressed once. Press again to place the teletext screen
over the programme (mix). Pressing again will quit
the teletext mode.
"RETURN" Index: Selects the teletext index page.
"INFO"Reveal: Shows hidden information (e.g.
solutions of games).
"OK" Hold: Holds a text page when convenient. Press
again to resume.
" "/" " Subcode Pages: Selects subcode pages if
available when the teletext is activated.
P+ / P- and numbers (0-9): Press to select a page.
Note: Most TV stations use code 100 for their index pages.
Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics. When
FASTEXT system is available, sections in a teletext
page will become colour-coded and can be selected
by pressing the coloured buttons. Press a coloured
button that corresponds to with your needs. The
coloured writings will appear, showing you which
coloured buttons to use when TOP text transmission
is present. Pressing " " or " " commands will request
the next or previous page respec tively.
All manuals and user guides at all-guides.com
Software Upgrade
• Your TV is capable of finding and updating new
software upgrades over broadcast channels.
• To search broadcast channels, the TV looks at the
available channels stored in your settings. So before
a software upgrade search, and auto search and
update of all available channels is recommended.
1) Software upgrade search via user interface
• It is possible manually to check if there is a new
software upgrade for your TV set.
• Simply navigate to the main menu. Choose Settings
and select the Other Settings menu. From the Other
Settings menu navigate to the Software Upgrade
item and press OK button to open the Upgrade
Options menu.
• In the Upgrade Options menu select Scan for
upgrade and press OK button.
• If a new upgrade is found, this is downloaded. A
progress bar indicates the download progress. When
the download completes successfully a message
is displayed asking you to reboot to activate new
software. Press OK to continue with the reboot
operation.
2) 3.AM search and upgrade mode
• If Automatic scanning in the Upgrade Options
menu is enabled, the TV wakes up at 03:00 and
searches the broadcast channels for new software
upgrades. If new software is found and downloaded
successfully, when you next turn on the TV, the new
software version will be active.
Note on reboot operation: Reboot is the last step in a software
upgrade operation if the download of new software completes
successfully. During the reboot, the TV completes final
initializations. While this happens, the TV is off and the front
LED blinks. After around 5 minutes the TV restarts with the
new software activated.
• If your TV fails to restart in 10 minutes, unplug
the power for 10 minutes. When you plug the TV
in again, it should turn on with the new software
activated. If you still cannot get the TV to work,
unplug and plug back in again a few more times. If
this does not solve the problem, you will need to call
in a service engineer.
Caution: While the LED is blinking during reboot do not
unplug your TV's power. Doing this may cause your TV not
to re-start again and can only be fixed by a service engineer.'
English - 32 -
Publicité
