dirna Bergstrom Bycool green line Slim Fit Instructions De Montage page 16

SLIM FIT
EN
2
CABIN EXTERIOR:
Position the Compact in the hatch gap on the
original edgeband.
Caution! When positioning the unit above
the hatch gap, check that the wastewater
run-offs are not blocked by the EPDM seal.
3
Remove (4) screws from the front, leaving it
secured by the cables.
4 Screw on (4) M8/125x37 hexagons with a
rubber washer and a flat washer and tighten.
4
All manuals and user guides at all-guides.com
16
Air conditioning for vehicles
Hatch
3
4
Hexagon M8/125x37
4
2
Base
Rubber washer
Flat washer