KOBE Brillia Série Manuel D'installation Et Mode D'emploi page 12

Final Assembly
7. To install the parametric panel:
Align the parametric panel at the back of the
-
unit. Refer to Figure 14.
Push the unit upward, and slide the
-
parametric panel forward into the notch to
secure the panel. Refer to Figure 15.
Flip the parametric panel upward until it
-
clicks into place. Refer to Figure 16.
CAUTION: MAKE SURE THE PARAMETRIC
PANEL IS SECURE BEFORE RELEASING.
8. Turn power ON in control panel. Check all lights
and fan operation.
9. Make sure to leave this manual for the
homeowner.
Figure 14
Figure 15
Figure 16
10