1. Safety instructions / 2. Description
1. Safety instructions
The appropriate national safety regulations (i.e. EN 837-2 Selection
!
and installation recommendations for pressure gauges) must be
GB
observed when installing, commissioning and operating these
Caution
instruments.
Serious injuries and/or damage can occur should the appropriate regulations
not be observed
Only appropriately qualified personnel should work on these instruments
The actual maximum surface temperature is not generated by the
instruments themselves, but primarily by the respective medium temperature!
For maximum permissible medium temperatures see Table 1.
2. Description
Nominal size 100 and 160 mm
The pressure gauges measure the pressure by means of elastic diaphragm
measuring elements. The reference point is absolute pressure "zero".
The measuring characteristics are in accordance with the EN 837-3
standards
4
WIKA Operating Instructions pressure gauges Model 5 per ATEX