OHAUS Courier 5000 Mode D'emploi page 24

EN-20
Settings of 1 to 5000 seconds are available. Default is 1. Printing occurs at the defined time interval.
MT-Continuous
Continuous
If MT-Continuous is selected, the print output will be in the MT-Continuous format.
mMt.CO
NOTE: Refer to 10.1 MT Standard Continuous Output for MT-Continuous format.
OH-Continuous
If OH-Continuous is selected, the print output will be in the OH-Continuous format.
NOTE: Refer to 10.3 OH-Continuous Print for OH-Continuous format.
OH.CON
UPS
Courier 5000 scale can be compatible with UPS WorldShip software when UPS is selected.
Mode
Set the printing conditions.
LOad
LOA2E
Stable Only
Set the printing criteria.
OFF
On
Content
Define the content of the printed data.
Result
Set the status.
OFF
On
Gross
Set the status.
OFF
On
Net
Set the status.
OFF
On
Tare
Set the status.
OFF
On
Header
Set the status.
OFF
On
NOTE: Refer to 10.2 OHAUS Commands, you will know how to enter the header line.
Footer
Set the status.
OFF
On
Find Quality Products Online at:
= printing occurs continuously.
= printing occurs continuously.
= printing occurs continuously.
= prints when the displayed load is stable.
= prints when the displayed load and zero reading are stable.
= values are printed immediately, regardless of stability.
= values are printed only when the stability criteria is met.
= disabled
= the displayed reading is printed
= disabled
= the gross weight is printed
= disabled
= the net weight is printed
= disabled
= the Tare weight is printed
= disabled
= the Header is printed
= disabled
= the Footer is printed
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com
Courier 5000