OHAUS Courier 5000 Mode D'emploi page 20

EN-16
4.3 Setup Menu
You can set the scale parameters with the menu
Menu Sub-Menu
Reset
Setup
Power On Unit
S.E.t.
End
NOTE: / indicates that it is not applicable in the table above.
Reset
Reset the Setup menu to factory defaults.
NO
= do not reset
yes
= reset
Power On Unit
Set the unit in the weighing mode after rebooting.
AUtO
g, kg, lb, oz, lb:oz = After rebooting, the selected weighing unit in the menu will be used regardless of
previously selected unit.
NOTE: The unit will not appear unless they are set to on in the unit menu.
End
The display exits the current menu and moves to the next menu.
4.4 Readout Menu
You can set the user preferences with the readout menu. Default settings are in bold.
Menu Sub-Menu
Reset
Stability
Zero Range
Filter Level
Auto Zero Track
Read Out
Back Light
(r.E.A.d)
Auto Off
PWM.SAVE
Calibration Lock
End
NOTE: / indicates that it is not applicable in the table above.
Reset
Reset the readout menu to factory defaults.
NO
YES
Stability
Set the amount reading can vary before the stability symbol turns off.
.5d
1d
2d
5d
Zero
Set the percentage of scale capacity that can be zeroed.
Find Quality Products Online at:
Sub-Menu
(in segment)
reset
PwWr.U
ENd
= After rebooting, the weighing unit will be the previously-selected unit.
Sub-Menu
(in segment)
PwWmM
= do not reset.
= reset
= 0.5 of a scale division
= 1 scale division
= 2 scale divisions
= 5 scale divisions
GlobalTestSupply
www.
S.E.t
. Default settings are in bold.
Options
no, yes
Auto, g, kg, lb, oz, lb:oz
/
Options
reset
no, yes
Stab
.5d, 1d, 2d, 5d
ZErO
2%, 100%
FIlt
Low, Medium, High
AZt
Off, 0.5d, 1d, 3d
LIGHt
Off, On, Auto
A-Off
Off, 1min, 5min, 10min
ON, OFF
Lock ON, OFF
ENd
/
Options (in segment)
NO, yes
AUtO,
g, kg, lb, oz, lb:oz
/
Options ( in segment)
NO, yes
.5d, 1d, 2d, 5d
2, 100
LOwW, mMEd, HIGH
OFF, .5d, 1d, 3d
OFF, On, Auto
OFF, 1, 5, 10
On, OFF
On, OFF
/
.com
sales@GlobalTestSupply.com
Courier 5000