Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Bolt mode (1) (clockwise/counterclockwise)
•
Bolt mode (2) (clockwise/counterclockwise)
•
Bolt mode (3) (clockwise/counterclockwise)
Registering application mode
To use the quick mode-switching function, register your desired application mode to the tool beforehand.
1.
With the button
2.
Press and hold the button
application mode blinks.
1
► 1. Quick mode-switching button 2. Button
NOTE: You can overwrite the current application mode with new one by performing the procedure above.
Using the quick mode-switching function
When the tool is in the mode that is not registered, press the quick mode-switching button to switch to the registered
application mode. The tool switches between the registered application mode and last application mode every time
you press the quick mode-switching button. The front lamps on both sides will flash once when switching to the regis-
tered application mode.
The lamp of the registered application mode will blink when using the registered application mode.
Erasing the quick mode-switching function
Press and hold the button
NOTE: After erasing the quick mode-switching function, the quick mode-switching button works for changing the
impact force.
Indication patterns
Application mode
4 (Max)
3 (Hard)
2 (Medium)
1 (Soft)
or
, choose your desired application mode.
and the quick mode-switching button at the same time until the lamp of desired
2
and
button at the same time until all impact force grade lamps blink.
While registering the application mode
When the registered application mode
13 ENGLISH
turns on
Publicité
Table des Matières
