Franke SMART FSM 709 HI Manuel D'utilisation page 13

AUTO function
"A"
11. COOKING TABLE
Power level Cooking method
1 Melting, heating gently
2 Melting, heating gently
3 Warming up
4 Prolonged cooking, thickening, stewing
5 Prolonged cooking, thickening, stewing
6 Prolonged cooking, braising
7 Light frying
8 Frying, deep fat frying
9 Quick frying at high temperature
Quick heating
P
12. SUCTION HOOD
FUNCTIONS
The controls for the cooking areas, suction hood and timer
can be activated by pressing on the reference Digit.
" 9 " Press "9" on the power bar to set INTENSIVE 1
speed. This setting is timed to operate for 10
minutes. Once this time has passed, the system
will automatically return to the speed set previ-
ously. It is deactivated by selecting a different
speed.
" P " Press "9" on the power bar twice to set INTENSIVE
2 speed. This setting is timed to operate for 5
minutes. Once this time has passed, the system
will automatically return to the speed set previ-
ously. It is deactivated by selecting a different
speed.
Func- This function is only available if Automatic mode is
tion deactivated. Automatic mode is deactivated by
pressing "A".
Delay
Press the suction hood Digit and set a speed on
the power bar.
Press the Timer management Digit, which was dis-
playing "CL" but will change to the countdown. This
is pre-set to 15 minutes.
Timer symbol
After selecting the suction hood Digit, press the
Timer Management Digit to set the countdown.
The standard setting when the hob/suction hood is switched on is for the hood to start up in auto-
matic mode with the LED "A" brightly lit. The Hood comes into operation if the power in the cooking
areas is greater than "1".
It is deactivated by pressing the LED "A" which changes intensity from bright to dim in confirmation.
It can also be deactivated by pressing a value, higher than "1", on the power bar, which is con-
firmed by the fact that the LED "A" changes intensity from bright to dim.
It is reactivated by pressing the LED "A" which changes to brightly lit.
To be used for
Butter, chocolate, gelatine, sauces
Butter, chocolate, gelatine, sauces
Rice
Vegetables, potatoes, sauces, fruit, fish
Vegetables, potatoes, sauces, fruit, fish
Pasta, soups, braised meat
Rösti (potato fry-ups), omelettes, breaded and fried
foods, sausages
Meat, chips
Steak
Boiling water
Grease filter maintenance symbol
The grease filter cleaning signal is displayed by
LED and it is always enabled.
Filter reset and reactivation
After having carried out maintenance on the filter:
press and hold for 5 seconds. - The LED of the
grease filter will turn off and the countdown will re-
start.
Charcoal filter maintenance symbol
The hood is set by default to ducting mode. With
no loads on, press the Hood controls digit to en-
able the suction hood. Press and hold the Digit
again for 5 seconds to:
Activate the charcoal filter:
The charcoal (odour) filter symbol lights up for 1
second.
Deactivate the charcoal filter:
The charcoal (odour) filter symbol flashes twice.
After activation, the icon will light up to indicate that
maintenance must be carried out on the charcoal
(odour) filter.
Reset and reactivation of the charcoal filter
After having carried out maintenance on the filter:
press and hold for 5 seconds. - The LED of the
anti-odour filter will turn off and the countdown will
restart.
13