Main Areas Of Application; Application; Coating Materials - Titan Tool ProMark Série Mode D'emploi

main areas of application

2
mAIN AreAS of ApplIcATIoN
2.1

ApplIcATIoN

ProMark Series MMA Striping Systems are specifically designed
to be used in the professional-grade spray marking of asphalt
and concrete surfaces.
exAmpleS of oBJecTS To Be SprAyeD
Roadways, intersections, parking lots, and other types of
asphalt or concrete surfaces.
8
2.2

coATINg mATerIAlS

proceSSIBle coATINg mATerIAlS
Sprayable dual-component materials to be used for road
marking.
No other materials should be used for spraying without Titan's
approval.
Pay attention to the Airless quality of the coating
i
materials to be processed.
VIScoSITy
The unit is able to process coating materials with up to
20,000 mPas. If highly viscous coating materials cannot be taken
in or the performance of the unit is to low, the material must be
diluted in accordance with the manufacturer's instructions.
Attention: Make sure, when stirring up with
i
motor-driven agitators that no air bubbles are
stirred in. Air bubbles disturb when spraying and
can, in fact, lead to interruption of operation.
coATINg mATerIAlS WITh ABrASIVe mATerIAlS
These have a strong wear and tear effect on valves, high-
pressure hose, spray gun and tip. The durability of these parts
cane be reduced appreciably through this.
TWo-compoNeNT coATINg mATerIAl
The appropriate processing time must be adhered to exactly.
Within this time rinse through and clean the unit meticulously
with the appropriate cleaning agents.
fIlTerINg
Sufficient filtering is required for fault-free operation. The unit
is equipped with a suction filter, an insertion filter in the spray
gun(s) and a high pressure filter on the unit. Regular inspection
of these filters for damage or soiling is urgently recommended.
ProMark