Connection And Installation; Parts For Connection And Installation; Connection; Power Connections - Sony XS-AW8 Mode D'emploi

Connection and Installation

Parts for Connection and
Installation
 Power supply leads (1)
 Securing screw
7 11
(5 × 8 mm ( / × / in)) (4)
32 32
 Mounting bracket (1)
 Mounting screw
(3 × 12 mm ( 1 / × 1 / in)) (2)
8 2
This parts list does not include all the package
contents.
 Mounting bracket (4)
 Mounting screw
7 13
(5 × 20 mm ( / × / in)) (4)
32 16
 Securing screw
(2 × 5 mm ( 3 / × 7 / in)) (2)
32 32
 Double-sided tape (1)

Connection

Please read all the connection procedures carefully
before making any connections.

Power Connections

• This unit is designed for negative ground (earth)
12 V DC operation only.
• Do not operate the subwoofer on a weak battery
as the subwoofer requires a good power supply
for optimum performance.
• Before making any connections, disconnect the
ground (earth) terminal of the car battery to avoid
short circuits.
• Connect this unit to the +12 V power supply lead
only after all other leads have been connected.
• If your car is equipped with a computer system for
a purpose such as navigation, disconnecting the
ground (earth) lead from the car battery may
damage the computer memory. Leave the ground
(earth) lead connected and connect this unit to
the +12 V power supply lead only after all other
leads have been connected to prevent short
circuits.
5
GB