Publicité
Les langues disponibles
Les langues disponibles
Connections to other equipment
To connect an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the
TV's remote control.
To control the audio, turn on the TV and the stereo amplifier, and turn off the TV's built-in speakers
(see "Speakers" on page 18).
To VAR. AUDIO OUT
NOTE:
To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set
above 0 (zero).
For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the
amplifier is at its highest level.
To connect a HDMI or a DVI device to the unit
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate
analog audio cords required.
Rear and left of the unit
To PC/DVI
AUDIO IN
To HDMI1/DVI IN
NOTE:
•
When using HDMI1/DVI IN to connect your HDMI or DVI devices, you must select the corresponding
audio input source (HDMI or DVI) on the menu screen (see page 16). Otherwise you will only see the
image with no sound.
•
If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable
or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To
receive the picture you must change the output resolution on the external component.
•
Should you require further instruction, please contact the manufacturer of the external component.
34
Rear of the unit
Audio cord (not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
HDMI cable (type A connector)
Amplifier
To Audio (L) Input
Audio cord (not supplied)
(not supplied)
(not supplied)
(continued)
To Audio (R) Input
To DVI output
DVI device
or
HDMI device
To HDMI output
Publicité
