JVC LT-32DM22 Manuel D'instructions page 18

Convenience functions
You can change the default settings by pressing the TV MENU button on your remote, then select the one of the
icons at the left of the menu - follow the On-Screen prompts to set your preferences.
Icon
Picture Picture
Preference
Picture Setting
Dynamic
Gamma
Picture Size
Film Mode
PC Setting
DNR
Audio Equalizer Mode
Audio Setting
MTS
Surround
Auto Volume
Audio Language
HDMI1 Audio
Speakers
Channel Add / Delete
DTV Signal
Auto Ch Memory
Ch Label
Lock
Setup Closed Caption
Language
Video Label
On Timer
Auto Shut Off*1
Auto Setup
PC Standby
*2
Reset
NOTE:
*¹ If there is no input signal in the PC mode, after 1 minute Auto Shut Off will be activated. In PC mode the "PC Standby"
setting takes precedence.
2
* The device may not conform to the Energy Star standard after Reset is performed or the Backlight is adjusted.
18
Selected Items
Sports
Standard
Movie
Memory
Brightness /Contrast /
Sharpness / Color / Tint
Color Temperature
*2
Backlight
On/Off
On/Off
Hor Position /
Ver Position
Clock
Phase
Auto Adjust
On/Off
Standard/Music/Movie/
News/Memory/Flat
Bass/Treble
Equalizer Setting
Balance
Stereo / SAP / Mono
On/Off
On/Off
HDMI
DVI
On/Off
Off / 0h30m / 1h00m
/ 1h30m / 2h00m /
3h00m⋅⋅⋅12h00m
On/Off
On/Off
Bright and dynamic picture (factory-set)
Standard picture quality (factory-set)
Movie-like picture setting (factory-set)
Your personal preferences (set by you; see "Picture Setting")
You can adjust the picture quality to your preference.
Bluish (Cool) / Neutral (Standard) / Reddish (Warm)
The Backlight feature adjusts the screen brightness for improved picture
clarity.
The Dynamic Gamma feature produces greater picture detail in dark or
bright scene areas.
See page 23.
A smoother motion may be obtained by setting the Film Mode to "On" (480i
only).
To adjust the horizontal / vertical position of the image on the PC monitor
screen. Each video standard will require a different value for this setting.
To minimize any vertical bars or stripes visible on the screen background.
This must be adjusted after the frequency has been set optimize picture quality.
To adjust the all PC settings automatically.
DNR (Digital Noise Reduction) can reduce the roughness of the picture.
You can adjust the Equalizer Mode to your preference.
You can adjust the sound quality to your preference. (Flat mode only)
100Hz/250Hz/500Hz/1kHz/2kHz/4kHz/10kHz (Not available in Flat mode)
You can adjust the sound quality to your preference.
The multi-channel TV sound (MTS) feature provides high-fidelity stereo
sound. MTS also can transmit a second audio program (SAP) containing a
second language or other audio information.
When the TV receives a stereo or SAP broadcast, the word "Stereo" or
"SAP" displays on-screen every time you press DISPLAY.
The dynamic presence and sound created offers a thoroughly enjoyable
listening experience.
Volume level can be adjusted automatically by the sound level.
When two or more audio languages are included in a digital signal, you can select one
of the audio languages. (This function is available only for digital broadcast.)
When you connect the HDMI device to the TV, select this setting.
When you connect the DVI device to the TV with analog audio cords, select
this setting.
Use this feature to turn the TV speakers off when you connect an audio system.
See page 19.
See page 20.
See page 19.
See page 20.
See page 21.
See page 22.
You can choose from three different languages (English, Français (French) and
Español (Spanish)) for the on-screen displays.
Select the language you prefer first, then proceed with the other menu options.
See page 20.
You can set the On Timer to automatically turn on the TV. To cancel the On
Timer select "Off".
If the Auto Shut Off feature is On, a station being viewed stops broadcasting
and the TV is not operated, the TV will automatically shut itself off after 15
minutes.
See page 16.
If the PC Standby feature is On. In PC mode, if no signal is received or
no operation performed for 1 minute, the TV will turn to standby mode
automatically (LED light will flash red). When an input signal is received or an
operation performed on the PC, the TV will return to the On mode.
The Reset function returns your Picture/Audio settings to the factory settings.
"Dynamic Gamma", "Picture Size", "MTS" , "Audio Language", "HDMI1
Audio" and "Speakers" cannot be reset by this function.
Setup hint