Sage the 3X Bluicer Pro Guide Rapide page 8

5. The safety locking arm should now be in a
vertical position and locked into place on
top of the juicer cover.
6. Slide the food pusher down the food
chute by aligning the groove in the food
pusher, with the small protrusion on the
inside of the top of the feed tube.
Food
pusher
groove
7. Place the pulp container into position by
tilting and lifting the motor base slightly.
Insert the pulp container under the juicer
cover on the back ensuring the front edge
is tucked under the back lip of the filter
bowl surround and the bottom edge is
clipped into the bottom of the motor base.
8
8. Drip stop plug can be fitted over juice
outlet nozzle. It then allows the outlet to
be plugged to prevent dripping
after juicing.
9. Fit the lid to the blender jug and position jug
under juice spout.
Small
protrusion
inside
feed tube
10. Optional: For juicing into a cup the
Juicing Nozzle can be fitted onto the
juice outlet nozzle.