Télécharger Imprimer la page

Kalorik CKS 40211 Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

Foil Cutter
The foil cutter can be stored on the charging base.
Before removing the cork, you must remove any foil from the bottle.
Attach the foil cutter to the top of the wine bottle.
Keep one hand on the lower part of the bottle and turn the foil
cutter in twisting motion to remove foil.
Remove foil to expose cork surface.
Wine pourer
Insert the wine pourer gently into the neck of the opened wine
bottle, making sure not to disturb the rubber collar at the base of
the pourer.
Using the pourer will oxygenate the wine while pouring, and avoid
annoying drips along the bottle when done.
The pourer is equipped with a stop cap that you can use to store
opened wine bottles for a very short period.
Wine Preserver
By removing the oxygen from the bottle, the wine preserver will
prevent the early oxidation of the wine which dulls and damages
the taste of the wine (red wines especially).
The wine center is provided with 2 special wine stoppers that will
keep the air from reentering the bottle after using the wine
preserver. The stoppers always need to be used in conjunction with
the wine preserver.
The wine stoppers are equipped with a silver ring that will enable
you to indicate the date at which the wine preserver has last been
used, and therefore to keep track of the time the bottle has been
opened.
We recommend drinking the content of an opened bottle within 3
to 5 days maximum to preserve its qualities.
To Operate Your Electric Wine Bottle Opener
Place the electric wine bottle opener on top of the wine bottle
making sure that it remains as upright as possible at all times. If you
hold the electric wine bottle opener at an angle to the bottle it will
not remove the cork properly.
Hold the electric wine bottle opener firmly and depress the down
(or lower) button. The corkscrew spiral will turn in a
www.KALORIK.com
7
CKS 40211 - 180330

Publicité

loading