ARDES AR5PR403V Mode D'emploi page 7

Always remember to unplug the power cable of the device if it is not used for a long period,
before storing, cleaning or performing any maintenance operation.
Store and use the device only indoor or in any case protected from weathering such as rain,
direct radiation of the sun and dust. The device is not design for the external use or storage.
The cleaning and maintenance of the device MUST NOT be done by children without the
supervision of an adult.
Before unplugging the device, switch it off, using the proper command on the control panel.
DO NOT hang the fan on the wall or ceiling unless this type of installation is provided and
explained in this manual.
Place the device at a proper distance from the objects or surrounding walls making sure that
its functioning will not cause accidental damages.
DO NOT use the device near gas stoves or open flames in general.
DO NOT use the device near curtains or textiles.
DO NOT hang the fan on the wall or ceiling unless this type of installation is provided and
explained in this manual.
DO NOT cover the device during functioning.
DO NOT insert objects or body parts inside the protection grille of the fan.
DO NOT leave the device unsupervised for a long period during functioning.
DO NOT expose yourself for a long period to the air flow generated by the device because
it can cause damage to the health.
If the fan must be stored for a long period and is not used regularly, place the fan in its
original packaging in a dry place. When you use it for the first time after a long period of
inactivity, make sure the fan is clean and the motor blades turn feely (with the device not
powered) without any restraint.
(EN) ASSEMBLING
(see images at the end of the manual)
(EN) INSTRUCTIONS FOR USE
Place the fan on a flat, dry and stable surface, and insert the plug of the fan in a socket.
Select the desired speed by pressing the buttons on the control panel (5):
0 =off 1 =minimum speed 2 =medium speed 3 =maximum speed
OSCILLATION:
For the automatic oscillation from right to left press the knob (6) placed on top of the motor.
To disable it, pull up the knob.
VERTICAL SLOPE:
You can vertically point the front of the fan choosing the desired
angle. It is sufficient to move the front of the fan up or down
according to the desired slope.
(EN) MAINTENANCE
Before carrying out the regular cleaning operations turn off the fan and unplug it.
Ensure that the fan is switched off from the supply mains before removing the guard.
For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
Reinstall the guard after cleaning and before connecting the plug tot he mains.
When you do not use it, after cleaning it, store the fan in a dry place.
7 / 32