ARDES AR5PR403V Mode D'emploi page 6

Ensure that the fan is switched off from the supply
mains before removing the guard.
ATTENTION : read this booklet carefully it contains important instructions for a safe
installation, use and maintenance.
Important instructions to be kept for future reference.
It is forbidden for the children to play with the device.
This device must be used only for the purpose it was expressly designed; any use not
complying with the instructions contained in the manual is considered inappropriate and
dangerous. The manufacturer is not responsible for possible damages caused by the
inappropriate and/or unreasonable use.
This device is NOT suitable to use it in an explosive environment (in the presence of
flammable substances such as gas, vapor, mist or dust, in atmospheric conditions when,
after ignition, the combustion is spread in the air).
The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out of the
reach of children or disabled persons since they represent potential sources of danger.
The installation/assembly of the device will be made/ or according to the indications of the
manufacturer. A wrong procedure may cause damages to persons, animals or objects, for
which the manufacturer cannot be considered responsible.
Place and use the device on a horizontal and stable surface.
Before use check the integrity of the device and power cable. In case you are not sure
contact a qualified person.
Before powering the device make sure the rating (voltage and frequency) corresponds to
the grid and the socket is suitable for the plug of the device. Make sure the power system is
equipped with proper protection according to the law in force.
DO NOT power the device using multiple sockets.
If possible, avoid the use of adapters and/or extension cables; if their use is absolutely
necessary, use only materials in compliance with the current safety regulations and
according to the electrical parameters of the adapters.
The device must not be switched on using external timers and/or other remote control
devices which are not specified in this manual.
DO NOT use or store the device near heat sources (heaters, stoves etc.).
DO NOT dip the device in water or other liquids; in case the accidental fall in the water DO
NOT try to take it out, but first of all unplug immediately the power cable from the socket.
If you use the device for the first time, make sure to remove any label or protective sheet
which blocks its proper functioning.
Plug and unplug the power cable with dry hands and hold it firmly.
Before plugging make sure the start button of the device is in the "OFF" position (turned off).
Always unplug the power cable to avoid the overheating and avoid stretching it (do not pull
it, tug it or use it to drag the device to which is connected). Avoid placing the power cable
on abrasive or sharp surfaces or in positions where it can be damaged easily.
DO NOT obstruct totally nor partially the air vents or inserts objects inside.
During the functioning do not touch the device with wet body parts, and in any case it is
recommended to have between you and the standing surface, an isolating element (for ex.
wearing shoes with rubber soles).
During the use the device must be keep at a safety distance from any object and/or
flammable or potentially explosive substance.
In case of malfunction or anomalies during the functioning, switch off the device immediately,
turn off the power and check the cause of the anomalies, if possible, with the support of a
qualified person. Avoid carrying out operations which are not specified in this manual (such
as disassembling and/or altering).
6 / 32