Publicité
w
1. Light switch "LIGHTS"
1. Contacteur d'éclairage
"LIGHTS"
1. Interruptor de luces
"LIGHTS"
q
2. Engine stop switch
"ENG. STOP"
2. Coupe-circuit du moteur
"ENG. STOP"
2. Interruptor de paro del
motor "ENG. STOP"
EBU00053
Handlebar switches
EBU11580
Engine stop switch "ENG. STOP"
Make sure that the engine stop switch is in the
"RUN" position before starting the engine. The
engine stop switch controls ignition and can be
used at all times to stop the engine, especially in
an emergency. The engine will not start or run
when the engine stop switch is turned to "OFF".
EBU13741
Light switch "LIGHTS"
Set the switch to the "LO" position to turn on the
low beam and the taillight.
Set the switch to the "HI" position to turn on the
high beam and the taillight.
Set the switch to the "OFF" position to turn off all
the lights.
NOTE:
The headlights and the taillight can be turned on
only when the engine is started.
4-3
Publicité
