Instructions For Use; Function Switch; Care And Maintenance - Franke 400 Mode D'emploi

INSTRUCTIONS FOR USE

FUNCTION SWITCH

Fig. 15
A. Fan motor speed.
B. Light switch.
It is a good idea to turn on the fan before
starting to cook, as this prevents odours
from spreading into the room. Adjust the
speed of the fan depending on the type of
food you are preparing. Preferably allow the
fan to run on low speed for a while after
cooking. If needed, also use the fan's low
speed when the oven is in use, or after us-
ing the dishwasher.

CARE AND MAINTENANCE

Cleaning
The cooker fan should be cleaned with a
damp cloth and washing-up liquid. The filter
must be cleaned approximately twice a
month, with normal usage. Both the filter
and the impeller can be removed when
cleaning.
Fig. 16
991.0358.686/126098/2015-01-20
Remove the filter cassette by pressing on
the clips on the front edge. Dismantle the
filter cartridge and remove the filter cloth
by loosening the retainer,Fig. 16. Squeeze
the filter cloth in warm water mixed with
washing-up liquid. The filter cassette (with
filter) can also be washed in the
dishwasher.
Fig. 17
The interior of the cooker hood should be
cleaned at least twice a year. Fig. 17 The
impeller and suction ring can be washed in
a dishwasher or soaked in washing-up
liquid.
The impeller and suction ring can be pres-
sed back in place after cleaning. Replace
the filter cassette and press it upwards so
that it clicks into place.
Changing the fluorescent light
Fig. 18
The lamp glass can be removed by pressing
the snap retainer in the direction shown by
the arrow, Fig. 18. The fluorescent tube is
now accessible for replacing.
11