Use - Franke FTU 3807 I XS 77H Mode D'emploi Et Installation

Hotte de cuisine
Masquer les pouces Voir aussi pour FTU 3807 I XS 77H:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

USE

Key
Function
Switches the extractor motor on and off at the
A
latest selected speed
Decreases the suction speed.
B
Increases the suction speed.
C
By pressing this key it is possible to activate
D
the intensive speed from any previously se-
lected speed. The intensive speed can be acti-
vated even when the motor is OFF. This speed
has been timed at 10 minutes. After that time
the system activates automatically the latest
selected speed. This function is suitable for
cooking conditions when vapours and smells
are of the utmost emission.
E
By pressing this key it is possible to set up the
motor to a suction speed at 100 m
minutes every hour. After this the motor
switches off automatically.
When the filter saturation is going on it is pos-
sible to reset the alarm by pressing this key for
about 3 seconds. The indication is visible only
when the motor is off.
By pressing this key it is possible to set the
F
delayed shutdown of the appliance to 30 min-
utes. This function is suitable for a complete
elimination of the residual smells. It can be
activated at any position, and it is deactivated
by pressing the key again or by switching off
the motor.
Turns light on and off .
G
Turns light on and off at reduced intensity.
H
EN
All manuals and user guides at all-guides.com
A
B
E
G
Control board
3
/h lasting 10
D
C
F
H
Display
Indicates the selected speed.
HI appears. The spot down on the right side
flashes once a second.
Indicates the 24-function. The spot down on
the right side flashes and the motor is on.
Once the process is finished the previous indi-
cation disappears:
FF
Indicates that the metal grease filters
saturation alarm has been triggered, and
the filters need to be washed. The alarm
is triggered after 100 working hours.
EF Indicates that the charcoal filter satura-
tion alarm has been triggered, and the fil-
ter has to be replaced; the metal grease
filters must also be washed. The charcoal
filter is triggered after 200 working hours.
Indicates alternately the selected speed of the
hood and the time left before the hood shut-
down. The spot down on the right side flashes.
1
14
4

Publicité

Table des Matières
loading

Table des Matières