Publicité
1. Float chamber
1. Cuve à niveau constant
1. Cuba
q
1. Float
2. Needle valve
1. Flotteur
2. Pointeau
1. Flotador
2. Válvula de aguja
q
e
w
3. Main jet
3. Gicleur principal
3. Surtidor principal
12. Remove the carburetors and then remove
the float chambers.
13. Remove the floats and needle valves.
14. Change the main jets and the jet needle
clip positions. (See page 8-53.)
NOTE:
Optional main jets can be obtained at a Yamaha
dealer.
8-61
Publicité
