Publicité
Les langues disponibles
Les langues disponibles
On the other hand, the user should not keep the engine speed in max speed after cutting.
Any prolonged use at the highest speed is likely to reduce lifetime of engine.
Cut the grass from right to left. (fig.18)
Always take care to maintain a well balanced and secure position.
Wear the harness as illustrated in the figure 17-3. The blade turns anti-clockwise, so it is
advised to use the unit from right to left to make an effective cut. Ensure the people present
are at least 15 meters away.
CAUTION!
In an emergency, stop the engine by moving the engine switch to the stop position.
If the cutting attachment strikes stone or other debris, stop the engine and check whether
something has been damaged and the cutting attachment is still secure.
If wet grass or branches are remain in the cutting attachment, stop the engine and remove
them.
Cutting attachements:
Attention! Use only original cutting devices from the Manufacturer.
Blade protection cover
Fig.19
GB
Fig.17-3
Fig.18
19
Publicité
