Publicité
Les langues disponibles
Les langues disponibles
GB
Fig.17-1
you can alter the height of the belt through the adjuster as below picture shows, and then
fit the belt to the machine through the hook.
Fig.17-2
A
Fig.17-4
Note: The harness is fitted with a quick-release mechanism. Pull the latch (A) if you need
to remove the strap quickly.
IMPORTANT:
Always use the harness when working with the machine .Attach the harness as soon
as you have started the engine and it is running in idle mode.
WARNING!
Please always switch off the engine before you take off the harness.
Cutting
During cutting, please don't keep the running speed just above clutch engagement speed.
Any prolonged use at low speed is likely to cause premature wear of the clutch.
18
Publicité
