Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
8.3 Error codes and flashing sequences
Flashing code
Short orange flashes
1x long green lighting
1x long red flash
Brief orange flashing
(every 10 s)
Brief orange glow (after
green or red receipt mes-
sage)
Alternating long and short
orange flashing
6x long red flashes
1x orange, 1x green light-
ing (after inserting batter-
ies)
Meaning
Radio transmission/send
attempt/data transmission
Transmission confirmed
Transmission failed or
duty cycle limit reached
Pairing mode active
Batteries empty
Device software updating
(OTAU)
Sensor not plugged in or
protocol not detected.
Test display
Solution
Wait until the transmis-
sion is completed.
You can continue opera-
tion.
Try again
(see „8.2 Duty
cycle" on page
22).
Enter the last four digits of
the device serial number
to confirm
(see „6.1 Pair-
ing" on page
18).
Replace the device batter-
ies
(see „7 Changing the
batteries" on page
Wait until the update is
completed.
Check the sensor connec-
tion and correct installa-
tion on your meter.
You can continue once
the test display has
stopped.
21).
23
Publicité
