Publicité
Smocking
Machine setting
q Pattern
w LED display
e Foot
Set the thread tension dial at 1–3, and stitch length at
3–4, sew straight lines 1 cm (3/8") apart across the
area to be smocked.
Knot the needle and bobbin threads along one edge w.
Pull the bobbin threads e and distribute gathers
evenly.
Sew lines of the decorative pattern between the
straight seams. Pull out the gathering stitches.
q 1 cm (3/8")
Fagoting
Machine setting
q Pattern
w LED display
e Foot
Fold under 1.5 cm (1/2") on each fabric edge and
press. Pin the two edges to a piece of paper 0.3 cm
(1/8") apart.
Sew guiding the fabric so the needle catches the
folded edge on each side.
Peel off the paper from fabrics.
Cross Stitch
Machine setting
q Pattern
w LED display
e Foot
You can make beautiful designs with this embroidery
stitch pattern, in half the time it would take if
embroidered by hand.
• Starting to sew
Choose a plain close weave fabric such as linen or
wool flannel for the background fabric. If you choose
light weight fabric, use a tear away backing for
support.
Adjust the stitch width as you desire to match the
pattern.
Sew outward from the center of the design.
Use the placement arrow "∆" on the foot F to insure
straight, even rows.
F: Satin stitch foot
F: Satin stitch foot
F: Satin stitch foot
q
e
w
q
q
70
w
e
w
e
w
e
q
Publicité
