Publicité
Les langues disponibles
Les langues disponibles
switching top and rear venting
TO CONVERT THE UNIT FROM TOP EXHAUST TO REAR EXHAUST
FOLLOW THESE SIMPLE STEPS:
1. Unplug the quick disconnect coupling that supplies power to the motor.
2. Remove the eighteen (18) screws that fasten the blower assembly and
filler plate to the hood.
180°
3. Remove the blower assembly and filler plate, invert 180° as shown and
fasten in place using the eighteen (18) screws previously removed.
4. Reconnect the quick disconnect plug.
- 13 -
Publicité
