Diamond AD1B/H-R2 Manuel D'installation page 34

5.4. Recommendations for Use
Load Disposition
!
ATTENTION !!
The incorrect stowing of the products to
be preserved can generate appliance
malfunctioning
Prolonged Inactivity
If the appliance remains inactive for a long period,
proceed as follows:
1. Use the automatic disconnecting switch to
deactivate connection to the main electrical
line.
6. CLEANING AND MAINTENANCE
6.1. Recommendations for Cleaning and Maintenance
!
Before carrying out any maintenance
intervention, activate
devices. In particular, deactivate the electrical
Max LOAD
OK
all envisioned safety
2. Clean the appliance and surrounding areas
thoroughly;
3. Spread a thin layer of cooking oil onto the
stainless steel surfaces;
4. Carry out all maintenance operations;
5. Leave the doors ajar to prevent the formation
of mould and/or unpleasant odours.
Recommendations for normal use
In order to ensure correct use of the appliance, it
is advisable to
recommendations:
 Do not obstruct the front and rear zones
above the condensing unit in order to favour
heat disposal from the condenser to a
maximum.
 Always keep the front of the condenser clean
using a soft brush and do not use rigid or
metal tools that may damage the condenser
fins.
 Check the planarity of the appliance rest
surface.
 Do not introduce liquid or solid substances at
temperatures
temperature and, however, introduce the
material after the appliance has reached the
functioning temperature.
 Do not stack the materials to be preserved in
contact with the internal walls, so blocking the
circulation of air, which guarantees uniformity
of the internal temperature of the refrigerated
compartment.
 Limit the number of times and the duration of
time the doors are open to a maximum.
power supply using the automatic disconnecting
switch.
11
ENGLISH
apply the following
above the environmental
GB