Publicité
Les langues disponibles
Les langues disponibles
8 Parameter setting
During parameter setting the device remains in the operating mode�
It continues its monitoring functions with the existing parameters until the
parameter setting has been completed�
8.1 Parameter setting in general
Each parameter setting consists of 6 steps:
1
Change from operating mode to parameter setting mode�
2
Select the requested parameter [SP1], [rP1] etc�
3
Change to the programming mode of the parameter�
4
Select or change the parameter value�
5
Acknowledge the set parameter value�
6
Return to the operating mode.
8.2 Programming example [ou1] ─ output function for OUT1
Step
1
Change from operating mode to parameter setting mode�
► Press [●] to get to the menu.
> The first parameter is displayed�
2
Select the requested parameter, here [ou1]�
► Press [▼] until [EF] is displayed.
► Press [●] to get to the extended functions menu.
> The first parameter of the extended functions is displayed�
► Press [▼] until the requested parameter [ou1] is displayed.
3
Change to the programming mode of the parameter�
► Press [●] to change to the programming mode.
> The currently set parameter value is displayed�
[●]
[▼] or [▲]
UK
[●]
[▼] or [▼] > 2 s
[●]
[esc]
Display
57
Publicité
