Publicité
Les langues disponibles
Les langues disponibles
► Select [cFH] and set the upper limit�
Setting range corresponds to the measured values� The lowest setting value is
[cFL]�
► Select [cFL] and set the lower limit�
Setting range corresponds to the measured values� The highest setting value
is [cFH]�
rd
gn
cFL
4 mA
Function [r-cF]
For b/w printouts: gn = green, rd = red
7.4.9 diS ─ refresh rate of the displayed value
• [OFF] = the measured value display is deactivated in the operating mode�
• [d1] = update of the measured values every 50 ms�
• [d2] = update of the measured values every 200 ms�
• [d3] = update of the measured values every 600 ms�
Even with an unsteady current value, [d1] provides optimum readability�
7.4.10 Lo/Hi ─ min/max measured input values
• [Lo] = minimum measured value
• [Hi] = maximum measured value
Delete memory:
► Select [HI] or [Lo]�
► Press and hold [▲] or [▼] until [----] is displayed.
► Briefly press [●].
gn
cFH
20 mA
Function [G-cF]
gn
rd
rd
cFL
4 mA
20 mA
UK
cFH
55
Publicité
