GreenWorks ELITE LB-430-T Guide D'utilisation page 10

ASSEMBLY INSTRUCTION
W A R N I N G
To prevent accidental starting that could cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
BLOWER TUBE ASSEMBLY (See Figure 2-3.)
• Align either of the grooves on the blower with the tabs on the blower tube. Push the tube into the
blower until the tabs engage the grooves.
• Turn the tube in the direction of the arrow until both of the tabs slide into locked position.
Tab
Tube
Lock Position
Grooves
FIG.2 FIG.3
10