Télécharger Imprimer la page

Furuno FR-10 Manuel D'utilisation page 167

Publicité

HDG - CAP, Déviation et Variation
$**HDG, x.x, x.x, a, x.x, a *hh<CR><LF>
1
2
3 4 5
1. Magnetic sensor heading, degrees (0.0 to 360.0)
2. Magnetic deviation, degrees (0.0 to 180.00)
3. E/W
4. Magnetic variation, degrees (0.0 to 180.00)
5. E/W
HDM - Cap, Magnétique
$ ** HDM, x.x, M *hh <CR><LF>
1
2
1. Heading, degrees (0.0 to 360.0)
2. Magnetic (M)
HDT - Cap, Vrai
$**HDT, xxx.x, T *hh<CR><LF>
1
2
1. Heading, degrees (0.0 to 360.0)
2. True (T)
RMB - Informations spécifiques de navigation minimales recommandées
$**RMB, A, x.x, L, CCCC, CCCC, xxxx.xx, a, xxxxxx.xx, a, xxx.x, xxx, xx.x, A, a *hh <CR><LF>
1
2 3
1. Data status (A=Data valid; V=Navigation receiver warning)
2. Cross track error (NM) (not used)
3. Direction to steer (L/R) (not used)
4. Origin waypoint ID (not used)
5. Destination waypoint ID (up to 15 characters)
6. Destination waypoint latitude (0000.0000 to 9000.0000)
7. N/S
8. Destination waypoint longitude (0000.0000 to 18000.0000)
9. E/W
10. Range to destination, nautical miles (00000.0000 to 10000.0000)
11. Bearing to destination, degrees true (0.0 to 360.0)
12. Destination closing velocity, knots (not used)
13. Arrival status (not used)
14. Mode indicator (A= Autonomous; D= Differential; E=Estimated; M=Manual input;
S= Simulator; N=Data not valid)
4
5
6
7
ANNEXE 3 INTERFACE NUMÉRIQUE
8
9
10
11
12 13 14
AP-11

Publicité

loading

Ce manuel est également adapté pour:

Fr-12