Publicité
Les langues disponibles
Les langues disponibles
When the surrounding temperature is 25℃ and the wine cooler has no bottle loaded, it will take around 10
minutes to increase the wine cooler's temperature from 5℃ to 12℃. Under the same circumstance, it will
take around 20 minutes to decrease the wine cooler's temperature from 12℃ to 5℃. The less the
temperature span is, the less time it will take. The setting temperature of upper zone should be lower than
the setting temperature of lower zone
Temperature alarm
The alarm will sound and the temperature display will flash when:
The temperature rises or falls outside the temperature range (5-20°C)
-
You switch the appliance on, if the temperature inside the appliance is very different (+/- 4°C) from
-
the temperature set after 7 hours working
Too many items have been put into the unit at one time, and the temperature inside the appliance
-
is very different (+/- 4°C) from the temperature set after 7 hours working
The door has not been closed tightly
-
Door alarm
If the door has been left open for more than 60s, the alarm will sound. Once the set temperature has been
reached in the appliance, the alarm stops and the relevant temperature display stops flashing. However, if
the noise disturbs you, you can switch the alarm off before this if you wish by pressing the key I once. The
alarm will stop. The relevant temperature display continues to flash until the set temperature has been
reached. The display then lights up constantly and the alarm system is fully active again.
Interior light
The interior light makes it easy to view your wines labels and enhances the display of your collection.
Touching the
mark (C) toggles between two modes of operation for the internal lights:
Functional mode (default): the light will turn on only when the door is open, this is the most
-
economic mode
Showcase mode: the lights will be on whether or not the door is open. To turn this permanent light
-
mode and get back the default mode, please push again the light button
Dynamic climate / silent mode
Wine cellars are designed to preserve your wines in perfect conditions over long periods in complete safety.
However, no frost systems can cause noise, this is the reason why the silent mode is the default factory
setting. Thus, you can switch off the silent mode to switch to the ventilated cooling mode by pressing the
key "+" (H) for 5 seconds. The cellar will emit 5 sound signals to confirm the passage in ventilated cooling
mode. Conversely, to deactivate the ventilated cooling mode and return to the default silent mode, press
and hold the key "-" (G) for 5 seconds. The cabinet will emit 3 sound signals to confirm the silent mode.
When this function is activated, the distribution of the temperature in the cavity is not so uniform, small
temperature differences can be observed between the top and bottom of the cellar.
Modes
SABBATH MODE
Sabbath mode is available for the observance of certain religious holidays. This mode turns off the displays,
interior light and audible alarms and prevents them from turning on again. Normal cooling operations will
still take place. To initiate sabbath mode, press the power (A) and light (C) keys at the same time for at
least 5 seconds. The indicator light will flash four times and confirm the sabbath mode is ON. Sabbath mode
can be stopped by repeating the above process. The sabbath mode will automatically exit after 96 hours.
ECO DEMO MODE
Eco demo mode can be activated by presenting the appliance at exhibitions, shows or in salesrooms. In
(C).
46
Publicité
