Proposition 65; Installation; Unpack The Machine; Unfold And Adjust The Lower Handle - GreenWorks Pro LMC415 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
SYM-
SIGNAL
BOL
CAUTION
5

PROPOSITION 65

This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power
sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
Lead from lead-based paints;
Crystalline silica from bricks and cement and other
masonry products;
Arsenic and chromium from chemically treated
lumber.
Your risk of exposure to these chemicals varies
depending on how often you do this type of work. To
reduce your exposure to these chemicals, work in a
well-ventilated area, and work with approved safety
equipment, such as dust masks that are specially
designed to filter out microscopic particles.
Save these instructions.
6

INSTALLATION

Do not change or make accessories that are not
recommended by the manufacturer.
Do not put in the safety key or the battery pack until
you assemble all the parts.
6.1

UNPACK THE MACHINE

Make sure that you correctly assemble the machine
before use.
If the parts are damaged, do not use the machine.
If you do not have all the parts, do not operate the
machine.
If the parts are damaged or missing, speak to the
service center.
MEANING
(Without Safety Alert Sym-
bol) Indicates a situation
that may result in property
damage.
WARNING
WARNING
WARNING
WARNING
WARNING
English
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
6.2
UNFOLD AND ADJUST THE
LOWER HANDLE
1. Pull up and back the upper handle (3) into operation
position. Make sure that the handles click into
position correctly.
2. Tighten the lower handle (4) with the quick-release
levers (8) on the two sides.
Make sure that the two handles are in the same
position.
Do not make damage to the cables when you fold or
unfold the handle.
8
3
4
NOTE
WARNING
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

2523502

Table des Matières