Publicité
Les langues disponibles
Les langues disponibles
Assembly Instructions
Put everything clearly on the ground and control the comple-
teness based on the assembly steps. Attention: The simplified
assembly process requires 100% attention. Especially in the
crease and folding positions. Assembly time is approx. 20min.
Step 1:
Remove the treadmill
1. Remove all small parts, loose packing material out of the box
and then take out with help of a second person the preassem-
bled frame of packaging. Don't cut the nylon strap for remo-
ving the base frame from carton.
Step 2:
Assembly of the treadmill
1. Place the screws (45) and teeth washers (63) on left and righ
side of base frame(1).
2. Cut now the nylon strap and fold up with care the supports left
and right side (3L+3R). Take a special view on the right support
(3R), because no squeezingthe cable.
3. Screw tightly the supports (3L+3R) at base frame by using
screws (45) and teeth washers (63).
4. Fold up the computer (14) into right position and tighten with
screws (45) and teeth washers (63).
19
Publicité
