Electrical Connection - WIKA REFRACTO-PAD TC59-R Mode D'emploi

6. Commissioning, operation

6.11 Electrical connection

CAUTION!
Damage to cables, wires and connection points must be avoided.
■
Flying leads with bare ends must be finished with ferrule ends (cable
■
EN
preparation).
The electrical connection is to be made according to the sensor connections/pin
assignments shown below:
Ceramic terminal block
Crastin terminal block
+
-
Cable connection
Cable
Colour coding of the wire ends see table
Single
thermocouple
16
Single thermocouple
Single thermocouple
+
-
Dual
thermocouple
WIKA operating instructions model TC59-R (REFRACTO-PAD
Dual thermocouple
Dual thermocouple
+ +
- -
- -
+ +
)
®