Daikin Altherma 3 H HT EPRA18DAV3 Manuel D'installation page 14

6 Finishing the outdoor unit installation
6 Finishing the outdoor unit
installation
6.1 To close the outdoor unit
NOTICE
When closing the outdoor unit cover, make sure that the
tightening torque does NOT exceed 4.1 N•m.
3 2
6.2 To install the discharge grille
Install the lower part of the discharge grille
1 Insert the hooks.
2 Insert the ball studs.
2
1
3 Fix the 2 lower screws.
3
2× 5 N•m
Installation manual
14
4 1
3 2
3×
4 1
Install the upper part of the discharge grille
NOTICE
Vibrations. Make sure the upper part of the discharge
grille is attached seamlessly to the lower part to prevent
vibrations.
4 Align and attach the left side.
5 Align and attach the middle part.
6 Align and attach the right side.
4
7 Insert the hooks.
8 Insert the ball studs.
9 Fix the 6 remaining screws.
9
6× 5 N•m
6
5
8
7
EPRA14~18DAV3+W1
Daikin Altherma 3 H HT
4P586100-1C – 2020.01