LOGICOM WISPEED F820 Manuel D'utilisation page 60

the battery voltage is low.
5.1 Battery charging
When the battery icon on the control screen appears empty and flashes, it means
that the voltage is low and the scooter does not have enough power to run normally.
Stop riding, as this may cause instability and shorten the life of the battery.
To charge your battery, please follow these steps:
•
Check that the charging connector below the power button is dry.
•
Connect the supplied mains charger to the scooter via this connector
•
Connect the mains charger to a mains socket.
•
If the LED on the charger lights up red, it means that the battery is being charged
correctly. If the light is green, check that the cable is correctly connected to the
scooter.
•
The WISPEED F820 takes about 6 hours to fully charge.
•
When the charger indicator turns from red to green, it is fully charged.
•
Unplug the power cable and then the scooter.
p. 60