LOGICOM WISPEED F820 Manuel D'utilisation page 53

To prolong the life of your scooter as well as the sturdiness of your scooter, we
recommend that you use the folding mechanism position lock. Be aware that when the
position lock is interlocked, this will prevent you from folding your scooter; it will need
therefore be unlocked after each use or when the scooter is left unfolded. To interlock
it, simply screw it onto the left side of the folding mechanism.
Logicom accepts no responsibility for any breakage of the
folding system that could result in injury and a loss of warranty
if this safety instruction is not followed.
2.4 Assembly of the scooter
Unfold the scooter (instructions below).
1
Unscrew the two screws at the top of the stem
2
using the hex key provided, then remove the
plastic cover as shown in the illustration.
Pull the brake cable and insert it into the
3
notch as follows:
Insert the sheath into the threader on the handle.
4
Insert the other end of the sheath onto the clip on the left side of the hook
5
p. 53