Télécharger Imprimer la page

OFFCAR 6UNICO Serie Instructions D'utilisation page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
3.1 Lighting
Make sure that the sauce collector is in position. Actuate the switch upstream of the appliance. For double appliances
there is the possibility of using each top independently at different temperatures or of using just one. Position the
thermostat from the setting "0" to the temperature required, between 50° and 300°C. The pilot lights come on: the green
one shows that power is supplied to the appliance, the yellow one that the resistors are actuated; as soon as the
temperature is reached this pilot light goes out.
To switch off the appliance turn the knob to the setting "0".
3.2 Special precautions
During use we recommend cleaning the top with a brush or damp cloth in order to free it from any residues of food, which
could form smoke and consequently unpleasant smells.
4. MAINTENANCE
4.1 Cleaning and care
During cleaning do not wash the appliance with direct or pressurised jets of water! Cleaning must be performed with the
equipment cold! Before starting cleaning disconnect the appliance from the mains. Remove the sauce collector, empty it
and wash it. Using a brush or damp cloth remove from the top the remains of food; the top and steel parts are to be
washed with hot water and a mild detergent. The top is to be rinsed with a soft cloth in order to eliminate any trace of
detergent. Dry the appliance carefully. Do not use abrasive or corrosive detergents which could damage the steel. After
cleaning we recommend oiling the top.
4.2 Action in the case of prolonged disuse
Clean and dry the appliance thoroughly as per the instructions, and switch off the current. Oil the top.
4.3 Action in the event of a fault
In the event of a fault switch off the appliance, cut off power by means of the device upstream of the appliance and
contact the service centre.
4.4 Maintenance
Any maintenance work is to be performed solely by qualified staff. Before starting maintenance, remove the plug or de-
actuate the switch upstream.
In the case of a fault in the working thermostat, the appliance is protected by a safety one. Resetting is performed by
switching off the appliance and pressing the red pushbutton under the panel, with the appliance switched off. Notify
qualified staff of the fault.
8

Publicité

loading