Understanding Your Training System - Zolux 487044 Guide D'utilisation

FR
Receiver/Collar
EN
PL
Receiver
Collar Strap
NL
ES
PT

UNDERSTANDING YOUR TRAINING SYSTEM

1/ How to turn on/off the unit:
To activate the receiver/collar, place
the red dot on the back of the
handheld transmitter to the red dot
on the receiver/ collar. Hold the two
red dots together for a moment
until the LED light on the receiver/
collar comes on.
To deactivate the unit, repeat the
same procedure holding the two
red dots together momentarily. The LED light will turn red for a brief moment indicating that
the receiver/collar is now shut off.
The handheld transmitter does not have an on/off switch, and it will only activate when buttons
are pressed.
2/ How the buttons work:
There are three buttons in front of the handheld transmitter.
N – Nick button: Nick is a single rapid pulse of electrical stimulation.
C – Constant button: Constant gives constant stimulation as long as
the button is pushed, for up to 12 seconds. The unit has an automatic
shut off when the button is pressed for more than 12 seconds.
P – Pager button: Pager is a non-stimulating vibration
14
LED
Indicator
Contact points
Battery charging
receptacle/rubber
plug
On/Off Magnetic switch
(Red Hot)