Publicité
Les langues disponibles
Les langues disponibles
ERRORS
Error codes
Problem
Code E1 is showing in the
display
Code E2 is showing in the
display
Potential causes
Water intake time is too long.
Overflow.
Should the appliance become overfilled or exhibit excessive leaking,
shut off the inlet tap and alert the service department. If all indicators
are flashing simultaneously: switch off the dishwasher immediately,
shut off the inlet tap and alert the service department.
Solution
Faucets is not opened, or water intake is
restricted,or water pressure is too low.
Some element of dishwasher leaks.
Note the code and alert the service
department.
EN 23
Publicité
