Publicité
Les langues disponibles
Les langues disponibles
Before performing any checking, maintenance or cleaning
task, remove the battery pack and the safety key from the
lawnmower.
The lawnmower does not require any additional lubrication
or servicing. However, for a continuous and trouble-free
operation, you must perform regular cleaning and proper
maintenance tasks.
Cleaning
After each use, clean all the components of the lawnmower.
Clean the lawnmower with a clean, damp cloth and blow it
out with compressed air at low pressure. Careful handling
protects the power tool and extends its service life.
The power tool and its ventilation slots must be kept clean.
Clean the ventilation slots regularly or whenever they
become blocked.
Storage
When not in use, store the lawnmower in a dry, clean place,
free of corrosive smoke and out of children's reach. Remove
the batteries when storing the lawnmower.
Always wear gloves when removing the blade to sharpen
or replace it.
▪ Remove the bolt with a drive socket. Use a wood block to
prevent the blade from turning when removing the bolt.
Then remove the blade;
▪ Install the blade using the blade bolt and centering
washer;
▪ Tighten the bolt with a drive socket. Use a wood block to
prevent the blade from turning when tightening the bolt.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
WhatsApp:
+351 965 157 064
E-mail:
support@vito-tools.com
Publicité
