Télécharger Imprimer la page

VITO GARDEN VIBCMR20 Mode D'emploi page 26

Publicité

Les langues disponibles

Les langues disponibles

When operating the machine, plan pauses and avoid
operating it for long periods of time. Permanent vibrations
are harmful to health.
Control and safety devices installed on the power tool may
not be removed or inhibited.
To avoid accidents, you should also consider the following
precautions and procedures:
▪ While using the lawnmower, stand in a stable position
and always keep your balance. Hold the lawnmower
firmly to ensure continuous operation and to withstand
unexpected situations.
When the blade gets stuck, immediately switch off the
lawnmower.
▪ Make sure that the ventilation slots are not clogged. Do
not place any objects over the ventilation slots.
Before performing cleaning, adjusting, repairing and
maintenance tasks, always remove the battery pack.
Replace worn out or damaged parts immediately, so that
the power tool is always in a safe operating condition.
Cleaning:
Always keep the power tool clean and dry, free from oil,
grease and lubricants. Clean all tool components and
accessories after use.
Do not use aggressive cleaning products. These products
may damage plastics and metals, compromising the safe
operation of the power tool.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out, all other works must be
performed by an official dealer.
Keep all nuts and bolts properly tightened so that the power
tool is in a safe operating condition.
If any components or safety devices are removed for
maintenance
works,
immediately and correctly.
Use only VITO-approved accessories for this machine or
technically identical parts. Failure to do so may result in
personal injuries or damages to the lawnmower. If in doubt,
if you lack knowledge or resources, you should contact an
official dealer.
Your lawnmower should only be serviced by the
manufacturer's internal service personnel, or other
qualified personnel, replacing any necessary parts with
original parts.
they
must
be
repositioned

Publicité

loading