Fichet-Bauche NECTRA Serie Mode D'emploi page 50

8. Technical specifications
The electrical characteristics of the Nectra
combination lock are as follows:
Power supply:
One 9 Volt/550 mAh alkaline battery
(type 6LR61)
One external power supply
Supply voltage:
8 volts to 18 volts
Consumption:
18 µA on standby
4.5 mA on wakeup
300 mA with the motor running
Force which can be exerted by the
blocking component
10N with a 9VDC power supply.
Materials of secure storage unit to
which the lock can be fitted
Metal or composite materials that are able to
withstand screwing or tightening.
Dimensions of the lock, boltwork or
cable way holes
Cable way hole connecting the secure unit
to the terminal: Round hole 5 to 13 mm in
diameter.
Nectra
Technical specifications
Mechanical dimensions:
Terminal:
D = 90 mm
H = 35 mm
Security unit:
L = 87 mm
H = 61 mm
P = 36 mm
Environment:
Operating temperature:
-10 to +55°C
Humidity:
20 to 80 %
Recommendations for protecting the
lock against destructive attacks
The cable way hole connecting the secure unit
to the terminal must be some distance away
from the secure unit's position.
Installation of bolt switches
The bolt switches are micro-switches which
should ideally be located directly on the lock
components, otherwise on the mobile section
of the boltwork.
The micro-switch's contact should be pushed
when the safe is closed.
50